I recently posted this image of the ThudGuard helmet on the Linkedin Playground Safety: Balancing Play Value & Injury Prevention group and asked what the members thought about it. After the predictable bout of mocking, the discussion became quite interesting. There was one mother who thought it was a good idea, but the majority felt is was another indication of over-protective parenting. Mind you, this is primarily a group of playground safety advocates, so their take was somewhat surprising.
Since I’ve been involved with designing and marketing play apparatus, fall surfacing, climbing walls, and skateparks, the issue of protecting kids from falls and the use of helmets has figured prominently throughout my five decades in this field. My experience leads me to the opinion that helmets and other protective gear should be worn when the player has the intention of testing the limits of their skill or when the environment is unpredictable. For example, helmets when dirt biking or on busy streets are a good idea but may not be necessary when playing in the neighborhood.
What makes us safe is not protective devices but judgment, honed reflexes, and fundamental movement skills. The goal is to reduce the frequency and severity of injury. If you watch a toddler learning to walk, they have several innate behaviors that help achieve this end. When they are about to fall forward, their reaction is to resume their crawling gait and extend their arms in what is called “protective arm reflex.” When the fall is backwards, they drop to their bottoms. In both cases these instinctual reactions do the job of head protection very well.
The question arises then, what is the impact of using a safety helmet? In talking with child development physiologists they suggest several issues. First, they suspect, although there is little research on this, that such protective gear may disrupt the normal progression of reflex maturation. They also are concerned that the lack of consequences when falling may retard the child’s ability to form proper assessments of their skill, i.e. reduce their judgment. Finally, they speculate that it reinforces a pattern of parenting that is over protective and ultimately harmful.
From this example we can see that what might appear as a good idea is fraught with complexity and perhaps unintended consequences.
Turning to playground safety it will probably be news to you, but the ASTM Playground Surfacing Committee is proposing to significantly increase the resilience requirements for playgrounds. The motivation appears to be that the goal of improving playground safety with the current standard has not significantly reduced the number of hospital visits.
To my mind this is not unlike the logic of the medieval doctor who, when their patient did not get well with one bloodletting, concluded that they needed more bloodletting.
Edge to edge rubber is becoming the norm. Credit No Fault Sport Group LLC
There are many possible reasons for the accident rates to remain unchanged that have nothing to do with the resiliency of the landing surface. One possibility is that the recent trend to cover the entire playground with rubber is so expensive that the amount of play equipment has to be reduced significantly. This results in a lack of events, which in turn reduces the opportunities for graduated challenge that allow kids to gain skills incrementally. On the one hand little kids must use equipment that is beyond their skill level and on the other hand older kids find little to challenge them and so use the equipment in inappropriate ways.
Another possible reason is that playgrounds have become so sanitized of challenge that most kids play elsewhere and the few kids who do come are far less skilled. We may be designing playgrounds for “motor-morons” who have poor reflexes and judgment.
There are also methodical and significant questions about how the data on accidents is collected that make the notion of imposing yet another expensive round of surfacing upgrades based on these “facts” highly suspect.
The point is that we just don’t know the answer.
But we do know the ASTM process, and it is deeply flawed. As you may recall, the initial data for the standard was drawn from research on automobile accidents. This makes a certain amount of sense because in the car crash scenario most of the variables are known and controllable. On the playground this is just not possible. Without a complete understanding of the human factors, we cannot be confident that any proposed solution will be effective.
I am reminded that the first time I saw an installation of 6-in of loose rubber chips I was astounded to see kids literally throwing themselves off the play structure as if they were jumping into a pool. We do know that kids will often play up to the point of pain. When you pad the pain, they just push harder.
It is quite clear that the whole process used in the creation of the surfacing standard is not based on robust science. For example, there has never been a formal A/B test where the same equipment and populations used different levels of fall attenuating surfacing. I can say that my experience in those cases where wood fiber was replaced by rubber mats, the incident of broken arms went from zero to several times a month. This got to be such a known risk factor that in many cases the wood fiber was reinstalled over the mats.
The industry is quite candid in their acceptance of this situation. They know that mats produce more long bone injuries than wood fiber. The notion is that the benefits of mats outweigh that exposure because kids get broken arms all the time and the main concern is head injuries. Well, tell that to the young lady who had a break on her femur growth plate and now has one leg two inches shorter than the other. Ask her how it feels to never be able to wear nice shoes, not to the prom, not to her wedding. The industry’s lack of concern for these sorts of injuries suggests that safety may not be their first priority.
Finally, how can we expect a system, in which every person in the decision-making process has a profound conflict of interest, to arrive at the overall best solution for society? How can we expect a process which is populated exclusively by engineers and business owners, and which systematically excludes broader representation, to understand that not every problem can be solved by the only tool they have.
I say it’s time we take a pause. It is time we demand that there be a broader range of experience, expertise, and opinion brought to bear on the issue. And it is time that we require actual proof that the proposed increase in the standard will actually produce the intended improvements to children’s safety.
Jay is a Most Valuable Player - Just like Ralph Nader.
Excellent article. Great passages on the lasting effects of a young child damaging their growth plate, how the illusion of safety is created, how the industry has conflicts of interest, how peer pressure influences play and more insightful commentary.
Good job in "calling people out" and calling for more robust science to support their claims.
What role do you think the insurance companies should play in resolving this "vicious cycle" that has been created.
Comment of you word selection
I have always enjoyed reading your articles, but have to say your choice of words are insulting and derogatory. Being 65, an accessibility consultant and a playground inspector and educator, your choice of "motor-morons" is way out of line. Perhaps you and the magazine should take a sensitivity training. 28% of the population has a disability. Many are cognitive.