Skip to main content

Main menu

  • Playground
  • Surfacing
  • Parks
  • Athletics
  • Aquatics
  • Play
Home
  • Playground
  • Surfacing
  • Parks
  • Athletics
  • Aquatics
  • Play
  • Playgrounds Make a Great Place for a Play Day
  • Critical Lightning Detection
  • Rules of the Red Rubber Ball Book Review
  • 3 Overlooked Benefits to Building a Playground in Your Community
  • Play Spaces for All Abilities

Breadcrumb

  1. Home
  2. Surfacing
  3. Maintenance
  4. Safety Surfacing

Safety Surfacing

Maintenance
November 01, 2001
Profile picture for user Playground Magazine
By Playground Magazine on
  • facebook-f
  • twitter
  • envelope
  • print
545

Weathering the Weather

Safety surfacing is a necessity for all playgrounds both indoors and out. With specific locations come specific considerations about weather. Climate is often not considered when choosing an appropriate surface for a playground. Let's look at different conditions and the pros and cons of using these various surfaces for each.

MOISTURE

Wet locations are more suited to rubber products rather than organic ones. Rubber does not deteriorate in the presence of moisture, nor does it absorb moisture. Tiles, poured-in-place, rubber mulch, and the like also do well in wet locations because they allow surface water to drain due to their porosity. Rubber surfaces also provide a relatively slip-resistant surface even when wet. Another advantage to using rubber products in wet locations is no loss of shock absorbency when wet. The only disadvantage is a higher initial installed cost when compared to other types of surfacing.

Organic surfaces such as engineered wood fiber can be used in wet locations, however special techniques for installation must be followed. Although drainage is recommended for most installations with wood fiber surfacing, it is critical in wet locations. To use wood fiber in wet locations, the sub-surface must be prepared. A four-inch minimum layer of washed stone must first be installed to allow for drainage of accumulated water in the surface. After the stone base is installed a layer of filter fabric must then be laid over the stone. The wood fiber surfacing is then laid over the filter fabric to the required depth. Generally, this procedure is adequate to provide a natural surface that will endure most wet weather conditions. However, more severe measures, such as a perforated drainpipe, may be utilized for severe water conditions. Because wood absorbs moisture, the surface may remain wet from several days to several weeks depending on specific weather conditions.

Sand is another option for surfacing in wet locations. Because it is a loose-fill material it allows water to drain easily. However, if you have ever been to the beach, I'm sure you have noticed people jogging or walking near the water. The reason for this is the sand is much denser when wet making it easier to walk on. This becomes a problem for safety surfacing because it decreases the shock attenuating characteristics of the sand, thereby increasing the risk of injury. Gravel is also a suitable choice for wet location s. It drains well, does not absorb moisture and does not gain density when wet. There is however a disadvantage to all types of loose-fill surfacing. These types of surfacing materials are easily contaminated with foreign materials. Pieces of glass, metal or wood in the surfacing can create a cut or puncture hazard from falling or stepping on these pieces. Weekly surface maintenance can reduce this risk.

TEMPERATURE

Temperature is another factor to be considered when choosing a surface. Serious burns have occurred to children coming into contact with surfaces exposed to high ambient temperatures and direct sunlight. This is particularly true of rubber surfaces containing dark colors. Warning signs around the playground cautioning parents and children about the potential for burns in hot weather can greatly reduce injuries of this nature. Loose-fill materials tend to dissipate heat more effectively than rubber. Although they may feel hot to the touch, the risk of burns is much lower than with unitary surfacing materials.

Areas with sustained cold temperatures or harsh winters have their own problems, which must be considered. Although rubber surfaces are well suited for cold temperatures, they are not ideal. Poured-in-place rubber and rubber tiles lose some shock attenuating value during cold weather. Special consideration to critical fall heights at lower temperatures must be made in order to ensure the proper thickness of surfacing is used.

Loose-fill surfacing such as engineered- wood fiber, sand, and gravel do well in colder climates. They are unaffected by temperature changes. There is, however, one consideration that should be made concerning surfacing materials of any kind in extreme cold weather. Surfaces that hold even small amounts of moisture can become as hard as concrete in freezing weather. Under these conditions, a fall to the surface can have the potential for serious and life-threatening injury

As you can see there is no one surface perfectly suited for every application. Heat, cold, rain, snow and sun must all be considered when evaluating options for safety surfacing. Many suppliers can provide test data showing the performance of their product in a variety of conditions. The more information you can get on a specific product, the better your ability to make the right choice for your surfacing needs.

Add new comment

About text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and email addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Profile picture for user Playground Magazine
Playground Magazine
Published 21 years ago
Last updated 3 months ago
545
2
min read
A- A+
  • facebook-f
  • twitter
  • envelope
  • print

Subscribe to our weekly newsletter

More About Maintenance

Sep 01, 2003
Maintenance

IPEMA Certification Program for Playground Surfacing

Playground Magazine
Mar 01, 2006
Maintenance

Surfacing in Style

Playground Magazine
Sep 27, 2016
Maintenance

Standards as a Measure of Consistent Performance

Rolf Huber
Dec 01, 2003
Maintenance

Crystal Ball 101

Playground Magazine
Aug 01, 2006
Maintenance

2006-2007 Buyer's Guide Industry Biographies

Playground Magazine
Mar 01, 2006
Maintenance

Synthetic Turf Surfacing Option

Playground Magazine
Sep 22, 2015
Maintenance

Playground Surfacing Requirements and Injury Reduction

Kenneth Kutska
Dec 01, 2006
Maintenance

Surfacing Company Directory

Playground Magazine
Dec 01, 2006
Maintenance

Proper Playground Surfacing Installation

Playground Magazine
Mar 01, 2013
Maintenance

New Eovations Technology Creates Tougher, More Durable Composites

Playground Magazine
Feb 16, 2021
Maintenance

Performing Reference Drops is as Important as Calibration

Rolf Huber
Nov 01, 2002
Maintenance

Routine Maintenance is Important for Unitary Safety Surfacing Air

Playground Magazine

Maintenance Professionals

GFactorGo
GFactorGo
Services
More
Triax Touch
Triax Touch
Services
More
River Rock Resurfacing
River Rock Resurfacing
Sales Rep
More
Rubber Smart Surface, LLC
Rubber Smart Surface, LLC
Manufacturer
More
Discount Playground Supply
Discount Playground Supply
Manufacturer
More
Home

Follow Us

Play and playground news and information since 2001

  • instagram
  • facebook-f
  • twitter
  • pinterest
  • linkedin

Company

  • Playground Magazine
  • Contributors
  • Advertise
  • Subscribe

Copyright © 2001 - 2023 Playground Professionals, LLC

Footer menu

  • Contact
  • Privacy
  • Terms and conditions